Arc Welding Service in New Orleans | Big Easy Mobile Welders

Home · Arc Welding

Arc Welding Service in New Orleans

At Big Easy Mobile Welders, we bring arc welding to residential and commercial customers across New Orleans. Our licensed, insured welders arrive in a fully equipped mobile unit and choose the arc process that suits your metal and your site.

Blue welding arc throwing orange sparks across a steel bar in the dark We come to the job

What Do You Get When You Book Our Arc Welding Service in New Orleans?

Our arc welding service in New Orleans comes with a free, no-obligation estimate, a process picked for your metal, a licensed and insured welder on site, clean joint prep and straight answers to your questions. We handle residential and commercial jobs, and you approve the price before any work starts.

  • A Free Estimate

    We look at the metal, the joint and how we will reach it, then quote the job with transparent pricing and no hidden fees.

  • Shielded or Non-Shielded

    We choose between a flux-coated stick electrode, a gas-shielded process or a gasless flux-cored wire. The metal, its thickness and the conditions on site decide which one we run.

  • Homes and Businesses

    We weld for homeowners and for commercial customers. The same team handles a single cracked bracket or a larger repair on a business property.

  • Joint Prep Before the Arc

    We clear rust, paint and debris from the joint with brushes and grinders. Clean metal gives the arc something solid to fuse.

  • Experienced, Insured Welders

    Your job goes to a licensed, insured and highly trained welder from a team with more than 20 years of experience.

  • Answers at Every Stage

    Ask us anything before, during or after the weld. We explain what we did and stay available for follow-up support.

Welder in a helmet arc welding a square steel tube beside a stack of pipes as sparks spray

What Kinds of Electrodes Does Arc Welding Use in New Orleans?

Arc welding in New Orleans usually uses one of four electrode setups: a flux-coated stick, a solid wire fed with shielding gas, a hollow wire filled with flux, or a tungsten electrode that does not melt. The electrode decides how the weld is protected from the air and which jobs each process suits.

  • Flux-Coated Stick Electrodes

    In shielded metal arc welding, the rod melts into the joint while its coating burns off. The coating gives off a protective gas and leaves slag over the bead, so no gas bottle is needed.

  • Solid Wire With Shielding Gas

    MIG welding feeds a bare wire from a spool while gas from a cylinder flows around the arc. It lays down clean welds quickly, but a breeze can carry the gas away from the joint.

  • Wire With Flux in the Core

    Flux-cored wire carries its flux inside a hollow tube. Self-shielded versions need no gas cylinder at all, while gas-shielded versions add one for heavier work.

  • A Tungsten Electrode That Stays Solid

    TIG and plasma arc welding strike the arc from tungsten, which does not melt into the weld. Any filler metal is added separately, by hand or by a feeder, inside a shield of inert gas.

Why Does Outdoor Arc Welding in New Orleans Call for the Right Process?

Outdoor arc welding in New Orleans calls for the right process because breezes and damp air both affect the weld. Wind can blow shielding gas off a MIG or TIG arc, and moisture can add hydrogen that leads to cracking. Processes that make their own shielding, used on a dry joint, hold up better.

Stick electrode striking an arc on a steel bar with sparks and smoke

On an open job site, the weather has a say in which arc process will hold up.

A steady breeze can strip shielding gas away from a MIG or TIG arc and leave pores in the weld. Stick electrodes and self-shielded flux-cored wire make their own shielding, so they usually suit outdoor work better.

Damp air is the other concern, since moisture in an electrode coating can raise the hydrogen in a weld and lead to cracking. We keep electrodes and joints dry before we strike an arc, and our guide on how to stop welds from cracking covers the other causes.

Why Bring an Arc Welder to Your Home or Business in New Orleans?

Bringing an arc welder to your property in New Orleans means the metal can be welded where it already stands. Gates, frames and railings fixed to a building stay in place, the portable equipment comes to you, and one team handles both shielded and non-shielded work.

Welder in a helmet stick-welding a metal frame in a doorway, arc light glowing
  • The Metal Stays Where It Is

    A frame bolted to a wall or a post set in concrete does not have to come out. We weld it in place, right where it is installed.

  • Equipment Made to Travel

    Stick welding gear is light and portable, which is why it works so well on site. Our mobile unit carries everything the job needs.

  • One Team for Both Methods

    We handle shielded and non-shielded arc welding. If the job calls for a different process partway through, we can switch without sending you elsewhere.

How Do You Book an Arc Welding Job With Us in New Orleans?

You book arc welding in New Orleans by asking us for a free quote, approving it and picking a convenient time. Our welders then prep the joint and weld it on site, and you review the finished work with us. Easy payment options and follow-up support come with every job.

  1. Ask for a Free Quote

    Call us or fill in the online estimate form with the metal, the damage and the location.

  2. Pick a Convenient Time

    Once the quote is approved, we schedule the visit around your day.

  3. Prep and Weld on Site

    Our welders arrive with the rig, clean the joint and run the process the job needs.

  4. Review the Work

    We walk you through the finished weld, offer easy payment options and stay available for follow-up.

Yellow wheeled welding machine with wire feeder and hoses, ready to roll to a jobThe rig comes to you

What Should You Have Ready Before an Arc Welding Visit in New Orleans?

Before an arc welding visit in New Orleans, know what the metal is and what it does, clear anything flammable from around the work, and make sure we can park near the job. On commercial sites, check whether hot work needs a permit first, since that can affect the schedule.

  • What the Metal Is and Does

    Tell us what the piece is made of if you know, and whether it carries weight. Photos of the damage help us plan the right process.

  • A Clear, Safe Work Area

    Move anything that can burn away from the joint. For businesses, our guide on hot work permits and fire watch for commercial welding explains what may be required.

  • Room for the Rig

    Let us know about gates, pets and parking. The closer the mobile unit can get, the shorter the leads we run to the joint.

What Do Customers Say About Our Arc Welding Team in New Orleans?

Customers describe our welders as reliable, quick to respond and professional from start to finish, with top-notch workmanship at a fair price. That feedback comes from homeowners and business owners who hired us, and it describes the same welders who now handle arc welding on site across the city.

Big Easy Mobile Welders provide quality welding work at a reasonable price. They have been reliable and quick to respond whenever I've needed them, which has made it easy for me as their customer!
Karen WightmanCustomer
The guys from Big Easy Mobile Welders were great! They came to my house and welded two iron railings with a quick turnaround time, which was just what I needed. The quality of workmanship is top notch which made me a satisfied customer! If you need anything welded then these guys will be able to help out big time.
Margaret TaylorIron railings
I can't recommend Big Easy Mobile Welders enough! They helped me out of a jam by welding our gate, and their work is amazing. The fast service combined with great quality made all the difference in getting things done quickly without any hassle for me. Thanks again, guys!
Russell BurtonGate welding
If you need a welder for any type of job, I highly recommend Big Easy Mobile Welders. The team did an amazing job on my home and business! They were professional from start to finish. Thankful that their work could help me get back up and running again sooner than expected.
Wayne ReyesHome and business
I had the pleasure of working with Big Easy Mobile Welders this past week. They are not only professional and skilled, but also very affordable! I highly recommend them for any welding job you may need done on your property or vehicle. You won't regret using these guys as they do amazing work at a fair price 10/10 would do again!
Mary GoodwinProperty and vehicle

Where Can You Get a Free Arc Welding Estimate in New Orleans?

To get a free arc welding estimate in New Orleans, fill in our online estimate form or call (504) 370-2757. Describe the metal, the damage and where the job is, and we will reply with a no-obligation quote you can review before anything is scheduled.

Loading the estimate form...

If it does not appear, call us at (504) 370-2757.

Gloved hand guiding a MIG torch along a steel channel as sparks fly

Which Arc Welding Questions Come Up Most in New Orleans?

New Orleans property owners most often ask us about arc welding basi