Gretna, LA Mobile Welders | Big Easy Mobile Welders

Home · Service Areas · Gretna

Gretna, LA Mobile Welders Company

At Big Easy Mobile Welders, we take a fully equipped mobile welding unit to Gretna homes and businesses for gates, railings, fences and custom steel work. Our licensed, insured welders repair the metal where it is installed, from older ironwork to new fabrication.

Welder in a red cap and mask crouched over a weld on pavement beside a red welding machine We come to the job

What Is Part of Every Welding Job We Do in Gretna?

Every welding job we do in Gretna includes an up-front estimate at no charge and no obligation, an experienced welder in a fully equipped mobile unit, joints ground and brushed clean, and a final look at the repair with you. Prices stay transparent, and paying is easy.

  • Quote Before Work

    We inspect the damage and price the repair up front, free and with no hidden fees.

  • A Welder With Experience

    Each repair is handled by licensed, insured welders who have over two decades of experience.

  • On-Site Equipment

    Our mobile unit carries the welding machine and hand tools, so gates and railings are repaired where they hang.

  • Joints Cleaned to Bare Metal

    Brushes and grinders strip old paint, scale and rust from the joint before the first pass.

  • Old Iron and New Steel

    We weld mild steel, stainless steel, aluminum and cast iron, from small repairs to larger custom work.

  • A Guarantee on the Work

    We walk you through the repair, back it with our satisfaction guarantee and offer follow-up support.

Sparks and smoke spraying from a welding arc in a dark workshop

What Metal Problems Make Gretna Owners Call a Welder?

Gretna owners usually call a welder when old ironwork or newer steel fails. Gates sag on worn hinges, porch and stair railings rust at the base, fence pickets snap, and balcony or window ironwork corrodes. Businesses call for brackets, frames and one-off pieces that cannot be bought off a shelf.

  • Gate Sagging on Old Hinges
  • Rusted-Through Fence Pickets
  • Stair Railing Pulling Loose
  • Corroded Balcony Ironwork
  • Broken Security Bars
  • Cracked Steel Bracket
  • Bent Fence After High Winds
  • A Matching Replacement Piece

What Signs Mean You Need a Welder in Gretna?

Gretna metalwork needs a welder once it loosens, a joint cracks or rust starts flaking off. Older metal gives warning signs before it fails, and repairing it at that stage usually saves more of the original piece than waiting until a post or panel breaks.

  • Play in a Post or Panel

    If a railing post or fence panel rocks when pushed, the weld or the base metal may be giving way.

  • Rust That Scales Off

    Layered rust that peels off in sheets has usually eaten deep, and that metal often needs replacing first.

  • Broken Decorative Pieces

    Snapped scrolls, pickets or finials on older ironwork can often be rewelded or matched.

Why Does Welding in Gretna Call for Extra Care?

Welding in Gretna calls for extra care because so much of its metal is old. About one in six homes was built before 1940, and the historic downtown holds older ironwork that needs careful repair. About a third of homes also sit in buildings with two or more units, so shared railings, stairs and gates are common alongside single-family work.

Old rusty iron gate between brick pillars

Gretna's housing stock and history set the tone for the metalwork we handle.

  • Older Than Most.Census Bureau estimates from the 2020 to 2024 American Community Survey show 16.5 percent of Gretna homes dating to 1939 or earlier, and more than a third to before 1960.
  • A Mix of Housing Types.The same survey counts 56.8 percent of Gretna's 8,352 housing units as single-family detached, with about a third in buildings of two or more units.
  • A Historic Downtown.The city's 2022 economic profile describes Historic Downtown Gretna as about 50 square blocks on the banks of the Mississippi River.
  • Riverside Humidity.Steel near the river spends much of the year in humid air, so a fresh weld should be primed and painted. Our guide on keeping welded metal free of rust explains how.

What Happens During a Mobile Welding Appointment in Gretna?

A mobile welding appointment in Gretna takes four steps: you reach us by phone or online for a free estimate, sign off on the quote and pick a weekday time, a welder preps and joins the metal on your property, and we go over the finished repair together, with support afterward if anything needs attention.

  1. Reach Out

    Phone (504) 370-2757 or send our online form describing the metal and the problem.

  2. Book the Visit

    Once the quote works for you, choose a weekday visit from 8 AM to 3 PM.

  3. On-Site Repair

    A welder sets up at your property, cleans the joint and completes the weld.

  4. Final Check Together

    We check the weld with you, and any later follow-up is one phone call away.

Yellow wheeled welding machine with wire feeder and hoses, ready to roll to a jobThe rig comes to you

How Do You Prepare for a Welding Visit in Gretna?

Ahead of a welding visit in Gretna, note what the metal is, check how our mobile unit can get close to it, and choose between saving the original piece and having a new one fabricated. For older ironwork, photos of the damage and of any decorative details help us plan the repair.

  • Know the Material

    Cast iron, wrought iron, mild steel and galvanized steel all weld differently. Our article on welding galvanized steel explains why coated metal needs extra prep.

  • Access and Parking

    Tell us where the unit can park and whether gates are locked or pets are out.

  • Repair or Replica

    Saving an original piece and building a new one are priced differently, so tell us which way you lean.

Can Our Mobile Welders Reach Cities Beyond Gretna?

Gretna is one stop among several for our mobile welders, who also drive to New Orleans, Metairie, Kenner, St. Rose, LaPlace, Slidell, Mandeville, Covington, Madisonville, Hammond and Baton Rouge. A customer in any of those places gets our trained welders, our equipped units and a free estimate.

Not sure we cover your street?

Request a free estimate or call us, and we will confirm before we book the job.

Where Our Rigs Roll

Lake Pontchartrain New Orleans

Schematic, not to scale. New Orleans and the 11 nearby cities we serve.

About Gretna

Gretna is a city on the West Bank of Jefferson Parish, just across the Mississippi River from downtown New Orleans.

  • Seat of Jefferson Parish

    Gretna has been the parish seat since 1884, and Jefferson Parish government buildings stand in its downtown.

  • Three Settlements, One City

    Gretna grew from McDonoghville, Mechanickham and the original Gretna, which Governor Luther E. Hall proclaimed the City of Gretna on August 20, 1913.

  • Population and Land

    The 2020 Census counted 17,814 people in Gretna, on about 4 square miles of land.

Things To Do

Most outings in Gretna start downtown, near the river and the old neighborhoods.

  • Gretna Heritage Festival

    Held in historic downtown, the festival features five stages of performers, according to the city's economic profile.

  • Mus